Paving block is an alternative to paving the road or yard. This material is also known to be environmentally friendly because water can still be absorbed through the gaps in the paving block arrangement so that it can minimize puddles.
Available in various sizes, colors, or patterns, the installation and selection of paving blocks can of course be adjusted to your needs. However, the installation requires precision so that the results are neat and strong. Well, for information, Kania will share a number of tips for installing paving blocks so that the results are not only neat, but also durable and long lasting. What are they? Come on, see the review below!
Prepare the Land Structure for Paving Block Installation red gradation paving block
Installation of block paving contractors should not be done in a hurry. Make sure you prepare the land well, where the process can start from clearing the land that still has grass or garbage, then level the mound on the surface of the land or cover the part where there is a hole.
If the land to be installed with paving blocks requires a backfill process, you can spread the backfill material on solid soil and then compact it using a roller. In addition, you can also flush the compaction area using water so that the results are more perfect.
Install Boundary and Supporting Concrete the use of paving blocks on the streets
Well, so that the paving block does not shift and can withstand the load, you can also install a concrete barrier. There are two types of concrete that you can use, namely cast concrete and cast concrete, where the installation itself can be done by installing a layer of supporting concrete with a minimum thickness of 7 cm. Then, install the barrier concrete on top of the supporting concrete which is still wet.
In this process, you can combine the concrete barrier with a layer of paving blocks using ropes and a water mouth to function as a rainwater drainage channel. In addition, this can also make paving blocks more durable even though they are exposed to wheel friction from vehicles.
Sand Installation for Paving Block installation of hexagon paving blocks
You also have to pay attention to the installation of sand with a certain thickness as the base for laying paving blocks. You can use coarse sand that has been cleaned of mud or other dirt, and in a dry state with a maximum water content of below 10 percent. Then, spread the sand evenly so that the results of installing paving blocks are more durable and long lasting.
Install Paving Blocks in One Direction the use of paving blocks in the front area of the house
After you have done land preparation, then you can immediately install paving blocks. In its installation, it must be done carefully and you should install paving blocks from one direction so that the results are neater.
However, if you choose a paving block variation whose installation must be done in two directions, then you must pay attention to the angle of the meeting pattern. In addition, you can also use auxiliary threads to make the installation process easier.
Pay attention to the finishing process paving stone arrangement
After the paving block installation is complete, then please fill in between the paving blocks using stone ash. Don’t forget to also compact the paving blocks using a baby roller so that the paving blocks can lock each other. Also clean the surface of the paving block from the remaining stone ash so that it is clean and ready to use!
Some of the tips above you can do so that the results of installing paving blocks are stronger and more durable.