Are there plans to install a paving block in the front yard or back of the house? No need to install it yourself, but you should understand how to install it neatly.
Why? So as not to be fooled by careless workers. Home is your responsibility. So, there is no harm in adding knowledge about neat paving block installation. If you need services for paving with the best materials and designs, you can hire a Pavers Australia.
There are several ways and tricks that you need to pay attention to when making a paving block installation.
Prepare a Solid Foundation.
Perform land clearing, level the ground surface by piling holes and bumps. If you need filling, do not use a sand base. Solid with water. Make sure there is a right slope for the foundation.
Install Concrete Barrier and Support.
Kerstin concrete or barrier concrete has an important role in holding and clamping the paving block so that it does not shift when holding the load. Supporting concrete is needed if using precast concrete as a boundary concrete. When using cast concrete in place, there is no need for supporting the concrete. Make sure the concrete divider and backing are installed properly.
Spread Alas Sand.
Pay attention to the criteria of good base sand. Coarse sand grains a maximum of 9.5 mm. Clean and dry. Spread evenly with a thickness of 5-6 cm.
Install One Direction.
Installation of paving blocks should be done in one direction.
Align with Finishing.
After completing the paving block installation, evenly fill the stone ash (or silica sand) in the gaps or grout using a Vibro roller (baby roller) or compactor (frog stamper) in 1-2 turns. After that, clean off the remaining stone ash. Now you already know how to install the paving blocks neatly. This understanding will be useful when you employ the services of a handyman. You know how to monitor and give the right advice.