Leakage in various types of residential homes does not seem to be a rare problem. This leak can be triggered by various things, one of which is a mistake in choosing materials in building a house. But the work process can also be one of the causes. Development work that is not done well can leave small mistakes that can be fatal, one of which is the cause of leakage. But the cause of leakage can also come from natural factors. Sometimes the use of various types of quality roofs cannot guarantee that your home will be free from leaks. Namely with the occurrence of high weather changes, between the hot sun in the afternoon and the cold night wind by the rain. This can trigger shrinkage and expansion on the roof so that it will eventually cause cracks and eventually leak. For that, you must choose the best roof service such as that provided by roofing contractors Oshkosh Wi when installing or repairing your roof.
Leaks that occur at home can certainly make residents feel uncomfortable. Besides this leakage can also trigger other damage to some elements of the house. Like moldy ceilings, damaged wall covering material, and so on. The room that was affected by the leak also will gradually become more humid so that it disturbs the health of the occupants. For that, you need to use anti-damp wall paint. Problems like this certainly cannot be left alone, because it can disturb the security of the building. Before you know how to deal with leakage in the house, you need to know what types of leakage can occur in the house. Identifying the problem first can help you find a solution faster. The following are some types of house leakage, namely:
- Broken house tile. This is the most common cause of house leakage. For this reason, home tile selection is very important so it does not break easily or even break.
- Gutter dirty water. One cause of leakage can come from dirty gutters. Usually, this happens on the gutter which is a meeting between the sloping plane of the roof. The cause of the gutter becomes dirty can come from leaves and branches that accumulate.
- Cell. The cell is a term used at the intersection of the roof angle at the top. This point can cause leaking if the mortar is imperfect.
- Use a non-concrete roof. The use of non-concrete roofs on residential areas should be avoided because these roofs tend to be more prone to leakage.
One other type of leak that you need to know is the leak at the confluence of walls and roofs. An example is the meeting between the roof of a house with the next residential wall. This type of leak is quite common because it is not easy to unite the roof with the wall. On this side of the wall, there is a roof connection and also a wall that if there is a leak will be marked by the appearance of water flow in a certain intensity. If you have this, what should you do? Is it by destroying the wall and rebuilding it? Or is there another way? Take it easy! Actually, this leaking problem can be solved in a simple way, you know! The following is a solution leaked at the meeting of the roof and walls that you can do, see!
Install the Gutter
Leaks like this are usually handled by adding gutters or layers of rock under the roof covering. But to do this, wait until conditions are absolutely safe. This means that your house is not leaking and the weather outside is not raining. If you force it right when it rains right away, this will certainly trigger undesirable things to happen.
The first thing you need to do is to install the gutter. The gutter must create an overlapping of 10 cm, then attach and tap the gutter on the wall as closely as possible.
Insert the Cement Mixture
After the gutter is finished, the next step is to make the cement dough waterproof. The ratio used in this mixture is 1: 2: 3 for cement: sand: water. The mixture is then put on the top of the gutter. Make sure all the surfaces of the gutters are completely coated. After that, leave the cement mixture until completely dry.
Provides a Waterproof Coating
The next step is to coat the cement surface with a waterproof layer. This is very important to protect the cement so that no further leakage occurs in the future. This waterproof layer can be in the form of plaster sheets which are then tightened to the gap created between the roof and the wall.
Replacing the Roof
When the waterproof installation is complete, you can re-attach the roof cover. This method can overcome the leak between the meeting roof and also the wall. But remember that the waterproof layer must be given on a scale basis.